Hard water in Minneapolis, MN
What Minneapolis Water Treatment & Distribution Services published about hardness for 2025, and what it means for scale, appliances and softener sizing.
5.5 gpg
Moderately hard 94 mg/L as calcium carbonate · plant effluent average
Source: Minneapolis Water Treatment & Distribution Services, Plant Effluent Water Analysis, Record of data for 2025. Data year 2025. Figures checked against the source on 2026-11-18.
Every hardness figure in the report
| Figure as published | mg/L (ppm) | Grains per gallon | USGS class |
|---|---|---|---|
| Total hardness (EDTA), average | 94 | 5.5 * | Moderately hard |
| Minimum – maximum | 80–113 | 4.7–6.6 * | Moderately hard |
* Our conversion at 17.1 mg/L per grain; the utility published the other unit only.
The line in the report reads:
Total hardness (EDTA) Maximum 113 Minimum 80 Average 94 (ppm)
These numbers describe the utility's system as sampled, not the water at a particular address. Home softeners, water heaters and building plumbing can all change what comes out of your tap. A test kit or strip at your own faucet gives the number to set equipment to.
What it means for your home
At 5.5 gpg, the main costs of hard water are practical: mineral scale inside tank water heaters and on heating elements, buildup in dishwashers, kettles and coffee makers, crusted aerators and showerheads, and extra soap and detergent. An ion-exchange water softener removes calcium and magnesium; most carbon and sediment filters do not.
Softener sizing example for Minneapolis
A household of 3 using 82 gallons per person per day (the EPA WaterSense home average) at 5.5 gpg needs a softener to remove about 1,353 grains per day, or 9,471 grains between weekly regenerations. Run the numbers for your household →
Questions
How hard is the water in Minneapolis, MN?
Minneapolis Water Treatment & Distribution Services reports 5.5 gpg (94 mg/L) in its Plant Effluent Water Analysis, Record of data for 2025, covering 2025. On the USGS scale that is moderately hard.
What hardness setting should I use for a softener in Minneapolis?
Start from the published figure (5.5 gpg) and confirm it with a test at your own tap, since the report describes the utility's system rather than your address.
Is hard water in Minneapolis a problem?
There is no EPA drinking-water limit for hardness, so this site treats it as a cost and maintenance question. Its practical effects are scale in water heaters and appliances, more soap use and spots on fixtures and glass.